home *** CD-ROM | disk | FTP | other *** search
- Path: ix.netcom.com!netnews
- From: fmma@ix.netcom.com (Franky)
- Newsgroups: comp.dcom.modems
- Subject: Re: Setup Sportster 28.8
- Date: 15 Feb 1996 08:35:45 GMT
- Organization: Netcom
- Message-ID: <4fur91$4em@cloner3.netcom.com>
- References: <4fucgm$2ho@jaxnet.jaxnet.com>
- NNTP-Posting-Host: lap-ca2-20.ix.netcom.com
- Mime-Version: 1.0
- Content-Type: Text/Plain; charset=US-ASCII
- X-NETCOM-Date: Thu Feb 15 12:35:46 AM PST 1996
- X-Newsreader: WinVN 0.99.7
-
- Which IRQ is the NIC using? Check the NET.CFG file for settings. If
- the NIC is using IRQ3, change both the NIC IRQ, usu. using the setup diskette
- that comes with the NIC and the parameter in the NET.CFG file. Good luck...
-
- Franky
-
- In article <4fucgm$2ho@jaxnet.jaxnet.com>, davehab@jax.jaxnet.com says...
- >
- >I need advice with this particular setup. At work we have a 486/dx2/66
- >clone on a novell network. I installed a Sportster 28.8 on com2/IRQ3
- >but can't seem to get the computer to communicate with the modem using
- >terminal or using AT commands from the DOS prompt.. MSD reports mouse
- >on com1/IRQ4 and the modem as above.
- >
- >Additionally->>>>
- >Initially the computer boots to the F: prompt and then runs windows
- >after logon is typed however when trying to run windows from a
- >C:prompt numerous dos error boxes are initiated.
- >
- >Would someone who has technical experiance with networks and modems
- >give me some advice.
- >
- >Thanks
- >
- >Dave
- >#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*
- #*
- >#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*
- >
- >Dave Habell PA-C
- >UFL. EDU.
- >904-549-5711 (W)
- >904-645-2057 (P)
- >904-264-4179 (H)
- >
-
- --
- +--------------------------------------------------------------------+
- | Peace be with you... |
- | ...Uncle Franky |
- +--------------------------------------------------------------------+
-
-